Electrical Planning Guide for Docking Drawer and Style Drawer Series Installations
Docking Drawer Charging Outlets have been listed by ETL and they comply with UL 962a when installed in accordance to outlet installation instructions. Additionally, our Style Drawer Powering Outlets have been listed by ETL and comply with UL 962a when installed in accordance to the outlets installation instructions. The following is a guide designed to provide steps for roughing-in an electrical supply for your Docking Drawer or Style Drawer Series outlet installation. Please review the specific installation instructions for each outlet.
All Powering Outlets come with a 20A, tamper proof, GFCI protected outlet.
Pictured below is the Docking Drawer installation wall. We use this in-house tool to illustrate electrical connections for our customers.
In-Cabinet Electrical Supply Location
Locating an electrical supply to provide power to your Docking Drawer or Style Drawer in-drawer outlet is straightforward.
Where to Locate the In-Cabinet Electrical Supply
The in-cabinet electrical supply can be installed in a variety of locations to provide power to your Docking Drawer or Style Drawer in-drawer outlet.
Charging Outlets
A standard 15amp in-cabinet outlet is needed and can be located at the bottom of the cabinet or just under the drawer that the Docking Drawer is installed into, etc.
Making the Electrical Connection from the In-Cabinet Outlet To The In-Drawer Outlet
Top Left |  |
Right Under the Drawer Box |  |
Bottom Left |  |
Powering Outlets
A 20amp supply is needed. This supply can be roughed-in with a surface mounted handy box or flush mounted using a junction box with a single gang cover plate and a Flex 90 connector anywhere in the cabinet.
Making the Electrical Connection from the In-Cabinet Outlet To The In-Drawer Outlet
Top Left or Right (Cord running under countertop) |  |
Right Under the Drawer Box |  |
Bottom Left |  |
To the left of the handy box |  |